Description of Requirement
To carry out mid life improvement to Defender TUM vehicles, comprising of the following operations.
1. Unload vehicle.
2. Receipt vehicle (complete receipt checklist)
3. Pressure wash vehicle.
4. Carry out 932B in inspection.
5. Carry out repairs as a result of inspection.
6. Carry out 2 yearly servicing tasks.
7. Fit rear roll over protection.
8. Fit front roll over protection.
9. Fit rear seat belts and anchor points.
10. Weld reinforcing plates to front outriggers.
11. Renew brake flexi pipes.
12. Renew steel brake pipes.
13. Remove Land Rover Defender rims.
14. Renew brake discs.
15. Renew brake pads.
16. Renew wheel cylinders.
17. Renew brake shoes.
18. Replace Defender wheel rims with painted Land Rover Wolf variant tubeless rims to be fitted with snap in valves (IRR Green).
19. Renew shock absorbers.
20. Renew track rod ends.
21. Renew radius arm bushes.
22. Paint preparation.
23. Body filler and panel beat.
24. Prepare & paint inside of rear body.
25. Prepare & paint interior footwell area.
26. Mask up vehicle ready to spray paint.
27. Paint primer.
28. Paint IRR green.
29. De-mask after spray painting.
30. Valet cab (to high cosmetic standard).
31. Renew both front seats (Exmoor Trim 'Wolf' style seats).
32. Renew rear seating.
33. Supply and fit data plate (7RU 9905-99-911-2371) to instrument binnacle cover, centrally over fuel gauge.
34. Renew reflectors.
35. Renew light lenses.
36. Renew headlights.
37. Renew ID plates.
38. Renew plates.
39. Renew wing mirrors.
40. Renew hard top / canopy (as applicable).
41. Paint ancillaries.
42. Wax inject chassis and bulkhead.
43. Under-seal chassis.
44. Carry out 932B out inspection.
45. Rolling road brake test (RRBT).
46. Smoke emissions.
47. Headlight aim.
48. Carry out road test.
49. Load vehicle.